Chapter 6: User Interface
SolarEdge Installation Guide – MAN-01-00002-1.7
32
Chapter 6: User Interface
Inverter LCD Panel and LEDs
The front of the inverter has an LCD panel and three LEDs, as shown below:
Figure 24: Single Phase Inverter
– Front
The LCD panel has three LED indicators:
Power Production - Green:
Indicates whether or not the inverter is producing power:
On:
The inverter is producing power.
Blinking
: Standby mode. The inverter is in Standby mode until its working voltage is reached.
The inverter then enters Production mode and produces power.
Off
: The inverter is not producing power. This may be during Night mode, when the inverter
ON/OFF switch is OFF or when an error occurs.
Module Communication - Yellow:
This LED blinks when monitoring information is received from a
power optimizer. In addition, this LED blinks during inverter shut down.
Fault - Red:
Indicates that there is an error. Refer to
Appendix A, Errors and Troubleshooting
on page
53 for more information. In addition, this LED blinks while the inverter is being shut down.
All LEDs are on while the inverter is being configured.
LCD
LEDs:
Green
Yellow
Red
LCD Light Button
