WATTrouter Mx - user manual
How to fit and setup the device
Page 49 from 82
Write detailed communication info - check this option to see more detailed information about
communicating with the controller, for example for diagnostics. Additional information may help the
technical support to detect possible problems in connection configuration etc.
OPTIONS AND BUTTONS
Main window buttons:
Connect through – this option allows you to connect via USB/RS485 or LAN.
Connect – connects your computer to the controller and loads configuration from the controller just
after successful connection has been established.
Disconnect - disconnects your computer from the controller.
Configure connection - the software displays a window where you may configure active connection.
Read – reads configuration from the controller.
Write – writes (downloads) configuration to the controller and optionally resets the controller.
Configuration download via LAN interface is protected from unauthorized access or intervention.
Open - loads configuration from PC hard drive.
Save - saves configuration to PC hard drive.
Reset to defaults – loads default configuration settings in WATTconfig (you have to write it then to the
controller).
Exit - exits WATTconfig software.