© 2018 Sol Inc. by Carmanah Technologies Corp | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | solarlighting.com | [email protected]
EVERGEN M SERIES USER MANUAL
INSTALLATIoN
22
by carmanah
®
5
Tighten two (2) installed 3/8"-16 set screws in tenon adapter and torque to 17 ft-lbs (201 in-lbs.). Do not
exceed the specifi ed torque to avoid stripping the threads in the tenon adapter
4
Make sure that the area between the solar panel(s) and direct sunlight is unobstructed.
THIS IS CRITICAL TO ENSURE PRODUCT PERFORMANCE.
CAUTION
2
Tighten installed 3/8"-16 set screws on integrated arm and torque to 17 ft-lbs (201 in-lbs.). Do not exceed
the specifi ed torque to avoid stripping the threads in the tenon adapter.
SET
SCREWS
USE AS
DRILL
GUIDE
3
Then orient solar panel(s) towards the equator (south in Northern Hemisphere).
7
Install supplied 1/4”-20 thru bolt with washers and nut then torque to 5 ft-lbs (64 in-lbs).
6
Drill two (2) 1/4” holes for tenon thru bolt from either side to ensure hole alignment, using the integrated arm
as a template.
USE CAUTION TO AVOID DRILLING INTO THE FIXTURE CABLE IF PRESENT.
NOTE
S
orientation in Northern Hemisphere
