Sol EVERGEN M SERIES User Manual Download

Page: 2 / 34

EVERGEN M SERIES USER MANUAL

by carmanah

NOTE

IMPORTANT

Keep your product order information. You will need it during setup.

The EverGen lighting system must be activated after assembly and

installation using the EverGen Setup App. Otherwise, the light will

not turn on and an additional site visit will be required.

To complete activation:

1. Download the EverGen Setup App from the ioS App Store or Google

Play store and ensure you have a compatible mobile device.

2. Contact Sol for a username and password.

3. Go to the location of the EverGen lighting system and use the setup

app to activate.

If you do not have wireless internet access onsite, use the app

to scan the product order number while within wireless internet

range to allow the app to download product information.

Activation can then take place onsite without a wireless signal.

NOTE

This installation and instruction manual provides installation instructions for the Sol EverGen Series solar LED lighting

systems. The entire contents of this manual should be thoroughly reviewed and understood prior to installing this

equipment. Do not discard this manual, as it contains complete installation instructions.

To ensure proper operation of this equipment, it is important that the equipment be used only for its intended purpose.

Any use of this equipment for purposes other than those intended will void all warranties.

Summary of Contents for EVERGEN M SERIES



































Search results

Summary of Contents for EVERGEN M SERIES

Reviews:

Related manuals for EVERGEN M SERIES

Brands by name

Popular brands

Sol EVERGEN M SERIES, User Manual

Search results

Summary of Contents for EVERGEN M SERIES

Reviews:

Related manuals for EVERGEN M SERIES

Brands by name

Popular brands