© 2018 Sol Inc. by Carmanah Technologies Corp | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | solarlighting.com | [email protected]
EVERGEN M SERIES USER MANUAL
ASSEMBLy
18
by carmanah
®
8. Assemble Battery Cables
1
2
While at ground level, install battery cable(s) to battery terminals following the color coordinated terminal
ends.
If installed, remove fuse from fuseholder.
CABLE CONNECTIONS VARY DEPENDING ON SYSTEM CONFIGURATION.
In highly corrosive environments, coat all fasteners and ring terminals with
dielectric grease.
NOTE
NOTE
3
Place the negative (-) wire (BLACK) ring terminal onto the negative (-) terminal of the battery.
4
5
6
7
Apply grease and thread supplied bolts, washers, and lock washers into battery terminal then torque to
50 in-lbs.
Place the positive (+) wire (RED) ring terminal onto the positive (+) terminal of the battery.
Apply grease and thread supplied bolts, washers, and lock washers into battery terminal then torque to
50 in-lbs.
Install terminal covers.
+
-
BLACK
FUSEHOLDER
MAIN BATTERY HARNESS
(2-BATTERY VERSION SHOWN)
!CAUTION!
RISK OF ELECTRICAL SHOCK
IF CONTACTS ARE SHORTED
!GREASE!
PROTECTIVE CAP
COVERING CONNECTOR
FOR SECOND BATTERY
RISK OF ELECTRIC SHOCK.
WARNING