© 2018 Sol Inc. by Carmanah Technologies Corp | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | solarlighting.com | [email protected]
EVERGEN M SERIES USER MANUAL
WARNINGS AND PRECAUTIoNS
3
by carmanah
®
Warnings and Precautions
The following symbols indicate important safety
warnings and precautions throughout this manual.
They are defi ned as follows:
NOTE
suggests optimal conditions
under which the equipment will
operate effectively and safely, or
provides additional information to
the reader.
CAUTION
CAUTION
indicates that damage
to equipment may result if the
instructions are not followed.
WARNING
indicates that serious
bodily harm or death may result
from failure to adhere to the
precautions.
Warranty Disclaimer
This manual will familiarize you with the features,
operation standards, and installation of Sol's EverGen
M Series. failure to comply with the use, storage,
maintenance, installation or placement instructions
detailed in this manual could void the warranty.
Standards
Perform all installation, wiring, and maintenance in
conformance with local building and electrical codes.
Adherence to the National Electrical Code (NEC)
is mandatory. Non-adherence to code may void the
warranty.
Safety and Usage Precautions
WARNING
Batteries are shipped fully charged.
Use extreme caution when handling
the batteries as they are capable
of generating hazardous short-
circuit currents. Remove all jewelry
(bracelets, metal-strap watches,
etc.) before attempting to handle the
batteries.
Solar modules produce DC
electricity when exposed to light
and can, therefore, produce an
electrical shock or burn. To render
solar modules inoperative, remove
them from sunlight, or fully cover
their front surface with an opaque
material.
Before lifting any heavy or bulky
equipment, ensure the load is
secured so moving parts do not
shift, and that it can be lifted as far
as needed without back strain or
loss of grip. Installation may require
more than one person.
Until the system is ready for startup,
keep the battery fuse out of the fuse
holder. Ensure the equipment is
not powered during installation and
wiring of the system.
Recheck all completed wiring for
proper polarity prior to energizing
the system.
NOTE
Changes or modifi cations to Sol
equipment not expressly approved
by Sol could void the user's
authority to operate the equipment.
WARNING
NOTE
