Sokkia Atlas Operator'S Manual Download Page 66 | Manualshive

Page: 66 / 73

Sokkia Atlas Operator'S Manual Download Page 66

Community of Europe Compliance

58

P/N: 1006148-01

Regul

a

tor
y

IC Additional Statement with Detachable Antennas

This device (with Digital UHF II modem) has been designated to operate with the antennas listed below and

have a maximum gain of 2.4dBi. Antennas not included in this or having a gain greater than 2.4dBi are strictly

prohibited for use with this device. The required antenna impedance is 50 ohms.
Sokkia Atlas Digital UHF II 2.4dBi whip antenna
Manufacture/Type
420-450 MHz LAIRD or ANTENEX/G420BN
450-470 MHz LAIRD or ANTENEX/G450BN
The device has been designated to operate with the antennas listed below and have a maximum gain of 2.1dBi.

Antennas not included in this or having a gain greater than 2.1dBi are strictly prohibited for use with this device.

The required antenna impedance is 50 ohms.

Community of Europe Compliance

The product described in this manual is in compliance with the R&TTE and EMC directives from the European

Community.

European Community Declaration of Conformity with R&TTE Directive
1999/5/EC

The following standards were applied: (R&TTE Directive 1999/5/EEC)

This equipment is intended to be marketed in the following countries:
List of National Codes:

•

AT DE MT GB

•

BE GR NL IS

•

CY HU PL LI

•

CZ IE PT NO

•

DK IT SK CH

•

EE LV SI BG

•

FILT ES RO

•

FR LU SE TR

The equipment is labeled with a CE! mark that informs users the DIG UHFII frequency range 410-470 MHz is

not harmonized throughout Europe and the specific country spectrum authority should be notified before a radio

modem is used.

• ETSI EN 300 113-2 v1.5.1(2011-11)

• ETSI EN 301 489-5 v1.4.1(2002-08)

• ETSI EN 301 489-1 v1.9.2(2011-09)

• ETSI EN 301 489-17 v1.5.1(2010-10)

• ETSI EN 301 489-7 v1.3.1(2005-11)

• ETSI EN 301 511 v9.0.2(2003-03)

• ETSI EN 300 440-2 v1.4.1(2010-08)

• EN 60950-1:2006:+A11:2009 &

A1:2010

• ETSI EN 300 328 v1.7.1(2006-10)

• EN 55022:2010

• ETSI EN 301 489-3 v1.4.1(2002-08)

• ETSI EN 301 489-24 v1.5.1(2010-10)

• ETSI EN 301 908-1 v5.2.1(2011-05)

• ETSI EN 301 908-2 v5.2.1(2011-07)

«
...
64
65
66
67
68
...
»

Summary of Contents for Atlas










































































Reviews:

No comments