manualshive.com logo in svg

Sokkia Atlas, Operator'S Manual, Page: 55 / 73

Share
Download
Sokkia Atlas Operator'S Manual Download Page 55

General Details  

 47 

P/N: 1006148-01

Sp
ecification

s

DGPS

User Base:
H: 0.4m 
V: 0.6m
SBAS:
H: 1.0m
V: 1.5m

Autonomous Accuracy

H: 1.5m RMS
V: 2.0m RMS

Cold Start
Warm Start
Hot Start
Reacquisition

<60 sec
<35 sec
<10 sec
<1 sec

a. Patent pending. Multiple patents are associated with Fence Antenna™ technology.
b. Includes two dedicated channels for L-Band signal tracking. The Sokkia Atlas receiver does not 

support L-Band signal tracking.

c. Support for L1C signal for GPS and QZSS is incorporated, and will be available through a 

firmware upgrade.

d. The Sokkia Atlas is capable of supporting E1, E5a/b and E5 AltBOC signals for Galileo. Full 

positioning support will be incorporated into Sokkia Atlas when these constellation have 
matured and are ready for commercial use, and as support is made available in the firmware.

e. For more recommendations, see “SD/SDHC Card Recommendations” on page 55.
f. CMR/CMR+ is a third-party proprietary format. Use of this format is not recommended and 

performance cannot be guaranteed. Use of industry standard RTCM 3.x is always 
recommended for optimal performance.

g. Subject to multipath anomalies, interference, atmospheric conditions, and atypical satellite 

geometry. GNSS survey best practices must always be applied.

h. The stated accuracy and reliability requires nominal observing conditions and strict processing 

methods. This includes use of dual frequency GPS measurements, precise (final) ephemerides 
during post-processing, calm ionospheric conditions, unobstructed visibility above 10 degrees, 
approved antenna calibration parameters, and an observation duration of 3 hours or more 
(dependent on baseline length). Accuracy and reliability may be subject to multipath 
anomalies and atypical satellite geometry. GNSS survey best practices must always be applied.

Table 8. General Receiver Specifications

Summary of Contents for Atlas










































































Reviews:

No comments