Battery LED
13
P/N: 1006148-01
Display P
a
nel Oper
ations
Bluetooth LED
The Bluetooth LED displays the status of the Bluetooth activity. Table 5 describes the activity.
Battery LED
The Battery LED indicates the remaining charge of each detachable battery. When an external power source is
utilized, the Power button LED turns solid green and begins to blink if the batteries begin to charge. See Table 6
for more information.
Red then Green (Red LED, off, green LED,
off)
Modem is in command mode
GSM/HSPA
Solid Yellow (Red LED + Green LED)
Modem is initializing
Green Flashes
The modem is on, registered on the network, and is
waiting for incoming calls
Solid Red
A connection had been established
Solid Yellow (Red LED + Green LED)
Green Blinks (DUHF II or SpSp)
The modem is in direct control mode (Daisy Chain)
Yellow flashes (green LED + red LED, off)
an error has occurred (initialization error, wrong PIN code
etc.)
Table 5. Bluetooth LED Patterns
LED Color
Description
Blue Blink: Bluetooth is on and waiting for a
connection.
Blue Solid: A single Bluetooth connection is
established.
No light: Bluetooth is turned off.
Table 4. Sokkia Atlas LEDs
Table 6. Battery LED Patterns
LED Color
Description
THE RECEIVER IS ON; USING BATTERY POWER
Slow Green Blink (5 sec.): The charge is greater than 85 percent.
Slow Orange Blink (5 sec.): The charge is intermediate.
Slow Red Blink (5 sec.): The charge is less than 15 percent.
EXTERNAL POWER IN USE(POWER BUTTON LED SOLID GREEN);BATTERIES ATTACHED
a,b
a. The receiver is on or off.
b. You can also charge the batteries using the battery charging cradle. See page “Battery Charging Cradle” on
page 17.
Fast Green Blink (1 Sec.): The internal batteries are at greater than 85% capacity; the
batteries are being charged.
Fast Orange Blink (1 Sec.): The internal batteries are at greater than 15% capacity;
the batteries are being charged.
Fast Red Blink (1 Sec.): The internal batteries are at less than 15% capacity; the
batteries are being charged.