manualshive.com logo in svg

Sokkia Atlas, Operator'S Manual, Page: 12 / 73

Share
Download
Sokkia Atlas Operator'S Manual Download Page 12

Getting Acquainted   

 4 

P/N: 1006148-01

• • • • • •

       Getting Acquainted

The Sokkia Atlas receiver enclosure is fully sealed and incorporates the GNSS receiver board, antenna, batteries, 

memory storage, and wireless communication device.

Receiver Overview

The upper portion of the receiver contains the GNSS antenna, which is enclosed by the radome and securely 

surrounded by a shock-absorbing rubber bumper. The receiver’s magnesium alloy lower enclosure features an 

easy-to-operate display panel, detachable batteries, quick release mounting socket, and data ports.
The Sokkia Atlas receiver has a highly-visible display panel with single-button operation. The display panel enables 

you to view the receiver’s operational status. For more information, see “Display Panel Operations” on page 11.
You can locate regulatory and product identification information on the two receiver labels, which are located 

inside of the battery compartments. The product identification label contains the serial number and part number.

Summary of Contents for Atlas










































































Reviews:

No comments