Soil Instruments RO-1 VW Note User Manual Download

Page: 36 / 52

Building a Sensor Configuration File

BUILDING

WITH VWNOTE

CONFIGURATION

TOOL

You can build the list of sensors with configuration in two ways:

•

Using the keypad on the VWnote to create and edit the list in the

VWnote’s internal memory. See

‘Detailed VWnote User Guide’

•

Using the VWnote Configuration Tool software (supplied free of

charge) to create and maintain the Sensor Configuration File on

your PC, then transfer it to the VWnote’s internal memory using a

USB flash drive.

VWnote Configuration Tool is a piece of Windows PC-based software

written to create and maintain the sensor configuration files. It is

supplied free with the VWnote. You can also download a copy of

the latest version from

www.soilsupport.co.uk

The latest version of VWnote Configuration Tool is distributed free on

the USB flash drive delivered with each VWnote. It is a single exe file

named ‘

VWnote Configuration Tool .exe

’ residing in the VWnote

software folder on the USB flash drive. There is no need to run a set

up program to install it.

INSTALLING

THE VWNOTE

CONFIGURATION

TOOL

You will need the following items before running the Tool:

•

A Windows PC with the following minimum PC requirements

•

A USB flash drive with the VWnote Configuration Tool software.

The PC running the VWnote software must have the following

minimum requirements:

•

‘

Windows XP

’ and above operating system

•

Pentium 4, 1 GHz or better specification

•

1 GB RAM

•

40 GB hard drive or solid state drive

•

USB port interface.

You can run the Tool directly on the USB flash drive or you can copy it
on to the hard drive on your PC and run it from there.

RUNNING

THE VWNOTE

CONFIGURATION

TOOL

TIP

VWnote Configuration Tool requires ‘

Microsoft .NET Framework

3.5

’ to run. On modern PCs running ‘

Windows 7

’ or above, ‘

.NET

Framework

’ is already installed. Download a copy from Microsoft.com

if you are running an older operating system, such as ‘

Windows XP

’,

and do not have it on your PC yet.

Summary of Contents for RO-1 VW Note





















































Search results

Summary of Contents for RO-1 VW Note

Reviews:

Related manuals for RO-1 VW Note

Brands by name

Popular brands

Soil Instruments RO-1 VW Note, User Manual

Search results

Summary of Contents for RO-1 VW Note

Reviews:

Related manuals for RO-1 VW Note

Brands by name

Popular brands