pg. 12
SOFTUB MAINTENANCE
WATER TREATMENT SAFETY WARNINGS
•
Read product labels carefully prior to use.
•
Always test water before adding water treatment products.
•
When diluting, always add water treatment products to water - do not add water to water
treatment products. Dry water treatment products should be dissolved prior to adding them in
the Softub.
•
Always store water treatment products according to the direction on the label. All water
treatment products should be stored in a cool, dry and well-ventilated area where the average
daily temperature does not exceed 32°C (89.6°F). Keep storage area clean of debris such as
rags, newspapers and combustible materials.
•
Always have the water circulating and air control turned off in the Softub when adding water
treatment products. Add water treatment products to the hot tub water one at a time. Allow
several minutes between any new water treatment product additions using the jets to evenly
distribute throughout the hot tub.
•
Wait approximately 30 minutes after adding water treatment products to the hot tub before
closing up your bi-fold cover.
•
Floating dispensers should never be used. They can bleach the liner and underside of the cover
by over-concentration and lowering the pH.
•
Do not use gas chlorination, ionizers, scents, salts or soaps that are not approved for use in the
Softub hot tub. Consult your dealer for more information.
•
There is a distinction between warm water and hot
– the maximum safe temperature is 40°C
(104°F). Fifteen minutes per soak is the recommended time at 40°C (104°F).
•
Never use a spa or hot tub if under the influence of alcohol or drugs.
•
Do not add water treatment products while the hot tub is in use.
