pg. 10
Ozone
(if equipped with optional ozone)
Ozone is a gas that is used as an aid to the sanitizer in the water. Ozone helps to oxidize any contaminants in
the water. The tub automatically cycles ozone into the water for 1 hour of every 2nd heat call as well as during
a filtration cycle, should one be deemed necessary. The ozone is controlled by a solenoid that automatically
opens and closes an air pathway to the body of water. In the event of a manual activation (depression of the
jets button) the ozone is automatically turned off and will not run until the next heat call or filtration cycle. This
prevents the immediate contact with ozone as well as delaying the automatic opening of the air control, which
leaves the control of the air to the discretion of the user.
Air Control
The main air control valve (grey knob w\ handle) is located in the center of the control panel of the
HydroMate®. To open the air control, rotate the knob counter-clockwise one quarter of a turn. To close the air
control, rotate the knob clockwise. Each jet can be individually directed by rotating the head of the jet. After
using your Softub the air control should be turned off to prevent cooler outside air from entering the water and
prolonging the heat up time.
Multi-Color LED Underwater Lighting
Some Softubs come equipped with the multi-color LED lighting. This optional light offers several different
lighting effects for your tub.
The unit operates in the following manner:
Depressing the LIGHT button turns the light on in the same mode it was last in. For example: if the light was
white when it was shut off, it will be white when it is next turned on.
If the light is turned off then back on within 10 seconds, it advances to the next mode. For example: if the light
is white, is turned off and the back on within 10 seconds it will come back on in a different colour. Turning it off
and back on again within 10 seconds will now advance the mode to the next colour, and so on.
