mbGa te PA - Qui ck Sta rtup Gui de
12
© Softing Industrial Automation GmbH
Mounting
1.
Hook the upper notch of the cut-out on the
back of the mbGate PA into a 35 mm DIN
rail.
2.
Press the mbGate PA down towards the
rail until it slides into place over the lip
of the locking bar.
Note
Do not put stress on the device by bending or torsion.
Dismounting
1.
Slide a screwdriver diagonally under the
housing into the locking bar.
2.
Lever the screwdriver upwards, pull the
locking bar downwards - without tilting the
screwdriver - and move the gateway upwards
off the rail.
