27
SPECIFICATIONS
Description
Measurement
Technology
Time Domain Reflectometry (TDR).
Cable
Measurements
Split Pair Detection:
3 ft (1 m) to 1,000 ft (305 m) length.
Measurement:
0 to 1,500 ft (457 m), ± (5%+1ft) supports 8 continuity and ID
number remotes (RJ-45) supports 20 FConnector ID only
remotes.
Power over
Ethernet
Tests for IEEE 802.3af and IEEE 802.3at.
(PoE Plus) compliant PoE Tests for mode and loads cable up to
25.5 watts (at mode 4).
Identifies Mode A or B (pairs with PoE).
Active Ethernet
Indicates advertised speeds of 10/100/1000base-t half or full
duplex.
Can Link to network at 10/100base-t.
Ping IPV4 DHCP.
Ping IPV4 or IPV6 IP addresses.
Device
Discovery
Discover IPV4 Device Host Names and IP addresses.
Maximum
Voltage
Parameters refer to the maximum voltage that can be applied
to any 2 connector pins without causing damage to the tester.
• RJ Jack: 66 VDC or 55 VAC
• F-Connector: 50 VDC or VAC
Save Test
Results
Stores up to 256 Cable or Network tests with user defined
names.
Tone
Generation
Tone Frequencies: 730 Hz and 1440 Hz.
Languages
English, French, Spanish, Italian, and German.
Battery Life
For 6 x AA, 9 VDC, 2,200 mA-hr (typical) alkaline battery:
Operating – 20 hours typical.
Standby – 1.5 years typical (200uA max standby current).
Batteries are included.
Altitude
10,000 ft (3048 m) operating.
Temperature
Operating: 32 to 122°F (0 to 50°C).
Storage
22 to +140°F (-30 to 60°C).
Humidity
10 to 90% non-condensing.
Enclosure
High-strength PC/ABS plastic with V0 rating with boot With-
stands
4 foot drop on to concrete.
Size
1.85”H x 3.6”W x 6.8”L (4.7 x 9.15 x 17.3 cm).
Weight
With batteries: 1 lb 2 oz (510 g).
Safety
Compliances
Warranty
1 Year.