16
http://itnetworks.softing.com
CableMaster 800
LINK LIGHT
The Link Light test is used to help identify a hub or switch port.
• Connect the CableMaster 800/850 to an active Network cable or port
• From the home screen, press the Network/PoE soft key then press the Link Light soft
key
• The Link Light will automatically begin upon entering the Link Blink menu
• The Link LED above the LCD screen will flash at the same cadence as the port light
• Use the up and down arrows to adjust the transmit frequency to adjust the link light
cadence
PING IPV4/IPV6
• The default Ping is set to IPV4. To change to IPV6, press the IPV6 soft key
• Connect the CableMaster 800/850™ to a switch, router, or active network jack
• From the home screen, press the right arrow button to select the Network
Discovery icon and press the Enter button or press the Network Discovery
soft key
• The CableMaster 800/850 will display DHCP test information upon entering the IPV4
Device Discovery screen
• Press the IPV6 soft key to ping IPV6
• Press the Ping soft key
• Use the left and right arrows to highlight a digit. To change a digit, use the up and
down arrows or press the Keypad soft key
to use an alphanumeric keypad. To
unselect the keypad, press the Keypad soft key again
• Press the Test button to ping the IP address
• The CableMaster 800/850 will display the Response IP, device name (if available),
and response time in milliseconds
