Softing BC-600-PB, Manual

Page: 42 / 44

General Notes Manual
Page 42 © 2013
14 General Notes
14.1 Lithium Battery
Warning! This product contains a lithium backup battery.
The lithium content is not more than 1 g. The battery has been successfully
tested by the manufacturer in accordance with the UN Manual of Test and
Criteria (test procedures of Part III, Sub-Section 38.3).
Improper handling of lithium batteries can cause the batteries to ignite or
explode and pose a burn hazard to users. If the product is properly handled,
this battery does not need to be replaced during the lifetime of the product.
Therefore, opening the product is unnecessary and not permitted. The product
must only be operated within the specified temperature range. Do not expose
to heat above this temperature range and keep away from open fire. Store in a
dry place.
14.2 CE Conformity
This product complies with the requirements of the EC Directives 2004/108/EC
Electromagnetic Compatibility (EMC directive)
Emission: EN 61000-6-4 Generic Emission Standard (industrial environments)
EN 55011 Group 1 Class A (ISM Product Standard)
EN 55022 Class A (ITE Product Standard)
Immunity: EN 61000-6-2 Generic Immunity Standard (industrial environments)
EN 61326-1 (Measurement, Control and Laboratory Equipment
Product Standard)
A Declaration of Conformity in compliance with the above standards has been
made and can be inspected at Softing AG on request.
NOTE:
For compliance with the legal EMC requirements, the other components
(PROFIBUS devices, AC adapter, etc.) must also meet these requirements. To
meet the EMC conditions, the product must be installed and connected in
accordance with the installation instructions.
Warning! This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.