Display and Control in Stand-Alone Mode
Manual
Page 36
© 2013
8.3.4
Master Simulator function
The master simulator is disabled by default when you switch on the tool. You
can only select a baud rate on the display and thus start the master simulator if
no other master is active.
8.3.5
Settings and help functions
The following options are available:
•
Settings/Delete all internal memory locations: Deletes all quick tests
and trend recordings
•
Settings/Current language: Toggles between English, German,
French, Italian, Polish and Spanish (all w/o national specific
characters)
•
Settings/Limit signal quality: Sets the limit value in increments of 100
(default: 2500)
•
Settings/Time-out signal quality: Sets the time-out value in increments
of 5 (default: 5 seconds)
•
HW Information: Displays on two screens the firmware and FPGA
versions and the date and time of the last factory calibration.
•
Help: Briefly describes the functionality of the four function keys.
Summary of Contents for BC-600-PB
Page 1: ...Manual PROFIBUS Tester 4 BC 600 PB FW version 1 13 rev 17 Revision 2013 05 31...
Page 2: ......
Page 43: ......
