3
SK/ZK Series User's Manual
Page 17
3.3 Host System Requirements
The Starter Kit is controlled by CodeWarrior Development Studio. The
following hardware and software are required to run the CodeWarrior user
interface together with the Starter Kit:
1.
A 200 MHz (or higher) PC compatible system running Windows 98,
Windows 2000 or Windows XP;
2.
128 MB of available system RAM plus 500 MB of available hard disk
space;
3.
A USB port;
4.
CD-ROM drive for installation.
3.4 Installing the Software
i
Note: before connecting the Starter Kit to the PC, it is
recommended that you install all of the required software first (see
below), so that the appropriate USB driver will be automatically
found by Windows when you connect the Starter Kit.
The Starter Kit requires that both CodeWarrior Development Studio Special
Edition and SofTec Microsystems Additional Components be installed in the
host PC.
i
Note: CodeWarrior Development Studio for HC(S)12 must be
installed first.
