3
SK/ZK Series User's Manual
Page 21
Click the
“Continue Anyway”
button.
8.
Windows will install the driver files to your system. At the end of the
installation, the following dialog box will appear.
Click the
“Finish”
button to exit from the
“Found New Hardware
Wizard”
procedure.
9.
The Starter Kit’s USB driver is now installed on your system.
3.6 Application Tutorial
This section will provide a step-by-step guide on how to launch your project
and get started with the CodeWarrior user interface.
1.
Ensure that the Starter Kit is connected to the PC (via the USB cable)
and that the board is powered.
2.
Make sure that all of the Starter Kit’s jumpers are set to their factory
position (see the
“Summary of Jumper and Connector Settings”
section
in the Starter Kit’s specific manual).
3.
Start CodeWarrior Development Studio by selecting
“Start > Programs
> SofTec Microsystems > SK and ZK-S12(X) Series > CodeWarrior
Development Studio”
. CodeWarrior Development Studio will open.
