4
Debugging Features
Page 28
First, ensure that the
“HW code”
parameter is set to your Starter Kit code,
then set the
“Device code”
parameter to the specific target microcontroller
you are working with. Additional communication parameters can be specified
by clicking the
“Communication Settings”
button.
4.2 GDI Target Interface Notes
The Starter Kit’s built-in USB to BDM interface is based on the SofTec
Microsystems’ inDART debugging engine. CodeWarrior is interfaced to the
inDART engine through a so-called “GDI Target Interface”.
If your project has been targeted to an emulator/simulator other than a SK-
S12(X) or ZK-S12(X) Series Starter Kit and you wish to use this Starter Kit
as the debugger for your project, please do the following:
1.
From the CodeWarrior debugger interface, select
“Component > Set
Target”
and choose
“HC12”
as processor and
“GDI Target Interface”
as target interface.
