3
Getting Started
Page 24
8.
From the main menu, choose
“Run > Start/Continue”
. The program
will be executed in real-time. By rotating the potentiometer on the
Starter Kit board, you affect the results of the A/D conversion, and the
result of each conversion is displayed on the Starter Kit’s output
section.
9.
From the main menu, choose
“Run > Halt”
. The program execution will
stop. The next instruction to be executed is highlighted in the
Source
window.
10. From the main menu, choose
“Run > Single Step”
. The instruction
highlighted in the
Source
window will be executed, and the program
execution will be stopped immediately after.
11. From the main menu, choose
“Run > Start/Continue”
. The application
will restart from where it was previously stopped.
Congratulations! You have successfully completed this tutorial! You can
continue to experiment with the CodeWarrior user interface and discover by
yourself its potentialities. For an in-depth guide of all of the user interface
