5
SK/ZK Series User's Manual
Page 39
5.1.3 Communication Errors when Using a BDM Tool
When using an external in-circuit debugger/programmer, the built-in USB to
BDM interface must be bypassed. To bypass the built-in USB to BDM
interface, please remove the
“RESET ENA”
and
“BKGD ENA”
jumpers.
Additionally, the
“MODA=1”
and
“MODB=1”
jumpers must be removed.
5.2 Getting Technical Support
Technical assistance is provided free to all customers. For technical
assistance, documentation and information about products and services,
please refer to your local SofTec Microsystems partner.
SofTec Microsystems offers its customers a free technical support service at
. Before getting in contact with us, we advise you
to check that you are working with the latest version of the Starter Kit system
software (upgrades are available free of charge at
http://www.softecmicro.com
). Additional resources can be found on our
HCS12 online discussion forum.
