8
EN
DIRIS B-10L - 551174A - SOCOMEC
2.2. Risk of damaging the device
Caution: risk of electric shock
Ref. ISO 7000-0434B (2004-01)
Caution Refer to the accompanying documentation each time this
symbol is shown
Ref. ISO 7000-0434B (2004-01)
To ensure that the device operates correctly, make sure that:
• The device is correctly installed.
•
The auxiliary power supply voltage indicated on the device is observed: 110 V - 230 VAC (± 15%).
• The network frequency indicated on the device is observed: 50 or 60 Hz.
• A maximum voltage at the voltage input terminals of 520 VAC phase/phase or 300 VAC phase/neutral is observed.
• Always connect the TE, TR/iTR or TF current sensors using the recommended connection cables and observing the
maximum prescribed currents.
Failure to respect these precautions could cause damage to the device.
2.3. Liability
• Assembly, connection and use must be carried out in accordance with the installation standards currently in force.
• The device must be installed in accordance with the rules given in this manual.
• Failure to observe the rules for installing this device may compromise the device’s intrinsic protection.
• The device must be positioned within an installation which complies with the standards currently in force.
• Any cables which need to be replaced may only be replaced with cables with the correct ratings.
