50
Reconnecting
If your PC suspends or the
Bluetooth
CRS is moved out of range,
the connection will be lost. After the PC turns on again or returns
in range, SocketScan will try to re-connect according to the “auto
re-connect” settings you chose in SocketScan.
After the time limit for re-connection attempts has
passed, you can click on the
Socket CS Connect
icon on the desktop to manually initiate re-connection.
Note: By default, CS Auto Power off mode is enabled. This mode must be
disabled for automatic reconnections.
Disconnecting
To disconnect, click on the SocketScan icon and click
Disconnect
CS
. The
Bluetooth
CRS will beep 2 times to indicate the
disconnection.
Note: If using ActivePairing, disconnect by turning off the
Bluetooth
CRS.
Turning off the Bluetooth CRS
To turn off the
Bluetooth
CRS, press and hold the power button on
the wrist unit for at least 2 seconds, until you hear 2 beeps (high –
low).
