Socket 9M User Manual Download Page 8

Page: 8 / 91

ACKAGE

ONTENTS

Wrist unit

Ring unit

Coiled cable

Finger straps (2)

Wrist strap

Wrist unit case

Li-ion battery

Battery charger

AC adapter with plugs

for USA and Europe

CD with software and

documentation

RODUCT

EGISTRATION

Socket recommends that all customers register their products.
Registered users benefit from priority technical support and can choose
to get special offers, and product/upgrade information. Register online
at:

www.socketmobile.com/support/support/new

OCKET

ARE

™

ERVICE

ROGRAM

The SocketCare service program is available for the

Bluetooth

CRS. For

more information, please visit:

www.socketmobile.com/support/

DVANCED

ROGRAMMING

UIDE

The

SocketScan Advanced Programming Guide

is available online at:

www.socketmobile.com/support/downloads/

Summary of Contents for 9M




























































































Search results

Summary of Contents for 9M

Reviews:

Related manuals for 9M

Brands by name

Popular brands

Socket 9M, User Manual

Search results

Summary of Contents for 9M

Reviews:

Related manuals for 9M

Brands by name

Popular brands