Lit. No. 30118, Rev. 00
June 15, 2020
28
Smooth Stop
Smooth stop, or soft stop, allows the blade to coast
to a stop when the button/lever is released. The
result is smoother operation, reduction in shock to
the hydraulic system, and longer hose and valve life.
While there are advantages to having this feature,
there are also advantages to temporarily disabling
it. For example, disabling smooth stop allows
for more precise movements of the blade while
operating close to buildings and other obstacles.
All controls come standard with this feature
ENABLED.
One-Touch FLOAT
One-touch FLOAT immediately activates the
FLOAT mode and releases the blade to the
ground, without having to hold the button or lever
in LOWER. This can improve transition time when
backing up to plow forward again, eliminating the
time spent holding the control and waiting for the
blade to fully drop.
All controls come standard with this feature
DISABLED.
FLEET FLEX ELECTRICAL SYSTEM
Enable/Disable Procedure
To enable/disable the smooth stop and one-touch
FLOAT features, perform the following steps.
Performing the sequence multiple times will toggle
the feature between enabled and disabled.
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position. (It is not necessary to
start the vehicle.)
2. Verify that the control power indicator is OFF.
If the power indicator light is red, the control is
ON. Turn the control OFF.
3.
Smooth Stop:
Move and hold the control
lever to the "R" position or press and hold the
R button while turning the control ON.
One-Touch FLOAT:
Move and hold the
control lever to the "LOWER" position or press
and hold the LOWER button while turning the
control ON.
The power indicator light will turn ON and the
FLOAT light will
fl
ash, indicating the status of
the feature.
Light Flash Indicators
Light
Description
POWER – Red Solid ON = Control is ON
FLOAT – Green
1 Flash = Feature is
disabled
2 Flashes = Feature is
enabled
SMOOTH STOP AND ONE-TOUCH FLOAT FEATURES
