Lit. No. 30118, Rev. 00
June 15, 2020
23
CONTROLS
The snowplow can be operated by a hand-held
control or by a joystick-style control.
Each control is equipped with an ON/OFF button
or switch and an indicator light to show when the
control is powered ON or OFF. The controls are
powered by the vehicle's battery, so the vehicle
ignition (key) switch must be ON to use the controls.
The ON/OFF button or switch on the cab control
allows you to turn OFF the control and prevent
blade movement even when the vehicle ignition
switch is ON.
WARNING
To prevent accidental movement of
the blade, always turn the control OFF
whenever the snowplow is not in use. The
power indicator light will turn OFF.
Power Indicator
Light (red)
ON/OFF Button
(emergency stop)
ON/OFF Switch
(emergency stop)
on side of control
Hand-Held Control
Joystick Control
The control ON/OFF button or switch serves as an
emergency stop, if required.
All controls are protected by a replaceable fuse
located in the control harness assembly. See
"Fuse Replacement" in the Maintenance section of
the Owner's Manual.
FLEET FLEX electrical system controls are
able to sense a lack of communication with the
electrical system. Should the indicator light start
to
fl
ash, refer to "Control/Cable/Plow Module
Test" in the Troubleshooting section of this guide.
OVERVIEW
