Lit. No. 30118, Rev. 00
June 15, 2020
49
RIGHT (PS) WING RETRACT – ELECTRICAL
System Response
1. Verify that the
POWER
switch is in the plow
position.
2. By activating the Right Wing Retract function
on the cab control, the control sends a signal
to the plow module to complete the ground
path for the electrical circuit, activating the
motor relay and solenoid cartridge valve S6C2.
3. Pressure within the hydraulic circuit causes the
PC2 pilot operated check valve to open.
4. Hydraulic
fl
uid from the pump
fl
ows through
the activated S6C2 into the rod end of the
passenger-side ram, causing it to retract
hydraulic
fl
uid
fl
ows through the open pilot
operated check valve PC2 and back through
the activated S6C2 to the reservoir.
NOTE: Battery voltage is supplied to the
plow module, motor relay and the 9 solenoid
coils when the snowplow is connected to the
vehicle.
