Snorkel ML10I, Operator'S Manual

Page: 11 / 28

Chapter 3 – Safety
ML5I • ML10I • ML15I • ML20I • ML25I – 7030242 7
NEVER use the material lift to raise or lower persons.
NEVER stand or climb on the material lift.
NEVER operate the material lift unless the legs and sta-
bilizers are fully lowered and locked and all casters are
in contact with the ground.
NEVER unlock or raise the legs or stabilizers while the
material lift is loaded or raised.
ALWAYS keep hands and fingers away from potential
pinch and shear points, such as folding legs and stabiliz-
ers, mast sections, and as indicated by decals attached
to the material lift.
NEVER operate the equipment unless the material lift is
located on a firm, level surface.
NEVER use blocks to level the material lift.
ALWAYS center the load on the load lifting attachment
and secure the load before operating the material lift.
NEVER stand under the material lift when the load is
raised. NEVER lower the material lift unless the area
below is clear of personnel and obstructions.
NEVER operate the material lift on a moving or mobile
surface, such as a truck bed.
NEVER exceed the rated load capacity of the material lift.
NEVER move a material lift with a raised load.
NEVER touch or grab the cable.
NEVER operate the material lift when exposed to high
winds, thunderstorms or other weather conditions that
could compromise the safety of the operator.
NEVER apply an additional side load or horizontal force
to a material lift that is loaded or raised. NEVER place
ladders or scaffold against the material lift.
NEVER use the material lift as a ground for welding.
NEVER leave the material lift unattended while a load
is raised.
Properly stow the material lift and secure it against un-
authorized operation at the end of each work day, before
transporting, or if it is left unattended.
Placards and Decals
The material lift is equipped with placards and decals that
provide instruction for operation and accident prevention.
Do not operate the aerial platform if any placards or decals
are missing, damaged, or illegible.
The location, description, quantity, and part number of
the material lift placards and decals are illustrated on
the following pages.