background image

Snorkel Product Warranty Policy

Snorkel Warranty Statement                                                                                                                                                             Effective 1/1/2017

THIS PRODUCT WARRANTY POLICY SPECIFICALLY EXCLUDES:

  1.  Engines, motors, tires and batteries are manufactured by specialist suppliers to Snorkel, who furnish their own 

warranty policies. Snorkel will, however, to the extent permitted pass through any such warranty protection to 
the Distributor/SSC/Customer.

  2.  Any Snorkel product which has been modified or altered outside Snorkel factories without written approval, if 

such modification or alteration, in the sole judgment of Snorkel Engineering and/or Service Departments, ad

-

versely affects the stability, reliability or service life of the Snorkel product or any component thereof.

  3.  Any Snorkel product which has been subject to misuse and abuse, improper maintenance or accident. “Misuse” 

includes but is not limited to operation beyond the factory-rated load capacity and speeds. “Improper mainte-
nance” includes but is not limited to failure to follow the recommendations contained in the Snorkel Operation, 
Maintenance, and repair Parts Manuals.

  4.  Normal wear of any Snorkel component part(s). Normal wear of component parts may vary with the type, 

application or type of environment in which the machine may be used; such as, but not limited to sandblasting 
applications.

  5. Routine maintenance, routine maintenance items and minor adjustments are not covered by this warranty, 

including but not limited to hydraulic fluid, filters and lubrication, paint and decals, engine tune-up, brake adjust

-

ments etc. Snorkel will not cover leaks from fittings, hoses and any other connection points after the unit has 
been in service for 90 days or 150 hours of operation which ever comes first.

  6.  Any Snorkel product that has come into direct contact with any chemical or abrasive material.

  7.  Incidental or consequential expenses, losses, or damages related to any part or equipment failure, including 

but not limited to freight cost to transport the machine to a repair facility, downtime of the machine, lost time for 

workers, lost orders, lost rental revenue, lost profits, expenses or increased cost. This warranty is expressly in 

lieu of all other warranties, representations or liabilities of Snorkel, either expressed or implied, unless otherwise 
amended in writing by Snorkel.

  8.  Snorkel warranty policy does not cover any duties, taxes, environmental fees including without limitation, dis-

posal or handling of tires, batteries and petrochemical items.

  9.  Items specifically excluded are: fuel injectors, motor brushes, glow plugs, contactor tips and springs, filters, 

lamp bulbs, lamp lenses, coolants, lubricants, brake pads and cleaning materials.

10. Failure of replacement parts due to fault misdiagnosis or incorrect fitting by the Distributor/SSC/Customer.

SNORKEL MAKES NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THIS LIMITED WARRANTY.  

SNORKEL MAKES NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE 

AND DISCLAIMS ALL LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED 

TO INJURY TO PERSONS OR PROPERTY.

Summary of Contents for ML10I





























Reviews: