UK • 14
Return to contents
If you would like to exit the Menu screen at any time press and hold the MUTE/MENU button for approximately 2 seconds. If no
buttons are pressed for a period of five seconds the unit will automatically exit the Menu and return to your chosen standby display.
3. Adjusting the Volume
The Pantera has an adjustable volume for controlling the loudness of the audible alert. To increase the volume simply use the UP/
DOWN button in the centre of the unit. Press the front of the button to lower the volume or press the back of the button to increase
it.
4. MUTE/MENU Button
This button has two functions. The Mute function is used to to temporarily MUTE an alert. When the button is pressed and held for
two seconds it allows you access to the Menu for further configuration of your unit.
5. Cancel Button
If during an alert you decide that you would like to cancel it simply press and hold the MUTE/MENU button. The display will
automatically return to the Standby screen and the device will be ready to alert you to the next GPS coordinate or laser source.
6. Alert Pattern
Fixed Speed Safety Cameras
As you approach a fixed speed safety camera the unit will begin to emit a voice alert or your chosen audible alert at your preset alert
distance. As you move closer to the fixed speed safety camera the ‘beeping’ will quicken. At the same time the display will indicate
the speed limit at that location and will then begin to count down the distance in 50 metre increments to that location.
Automute
When your device alerts you to a location, rather than continually beeping through the alert, it simply beeps at your selected volume
for five seconds and then automatically mutes the sound to volume level 3 until you are out of range of the source. This allows you to
receive a brief audible alert instead of a continuous one.
If you would like to change the alert to a visual alert only press the MUTE/MENU button to temporarily turn off the sound.
SPECs Safety Camera Systems
Due to the fact that the SPECs system incorporates a series of cameras that monitor a vehicles speed over a fixed distance, a different
alert pattern has been devised to ensure that your concentration is maintained throughout the danger zone.
When approaching the first camera in the SPECs system your Pantera will begin to alert you at your chosen preset alert distance with
the display indicating ‘SPEC’ and emitting either a voice or your chosen audible alert. The display will then change to indicate the
speed limit at this point and then count down the remaining distance in 50 metre increments to the location of the camera.
Once you have passed the first camera the unit will then emit an audible alert and will alternate the display showing ‘SPECs’ and the
speed limit every five seconds to remind you that you are still within the SPECs system.
Whilst travelling within a SPECs series, your Pantera will provide both an audible and visual alert 250m before each camera. If after
twenty seconds you do not pass another camera, the alert will automatically ‘Time Out’ and the alert will finish. If the unit ‘Times
Out’ and you then approach the next camera in the SPECs series however, the unit will alert you to that location at your preset alert
distance.
Please Note: If you join a road in the middle of a SPECs series you will automatically get a visual and audible alert, 250m before
the first camera that you pass.
If you would like to change the alert to a visual alert only press the MUTE/CANCEL button to temporarily turn off the sound. If at any
time you would like to stop the alert, simply press and hold the MUTE/CANCEL button.
Summary of Contents for Pantera
Page 1: ...User manual ...