UK • 12
Return to contents
Power Connection
Using the cigarette lighter socket
Connect the smaller right angled plug to the socket marked ‘DC 12V’ on the Pantera.
●
●
Push the cigarette lighter plug firmly into the vehicles cigarette lighter socket.
●
●
Please Note: Do not leave your Pantera plugged into the cigarette lighter socket when you
start your vehicle. The cigarette lighter socket is prone to power surges as the vehicle is started
and this may cause damage to your unit.
If the device does not power up please check that the cigarette lighter socket is clean of any
debris, remembering not to insert metal objects into the socket. Check that the cigarette lighter
adaptor is inserted all the way into the socket and to check that the fuse in the cigarette lighter
adaptor is operational. If your Pantera will still not power up, please check that the cigarette
lighter in your vehicle is functioning correctly.
Replacing the Fuse
If the unit stops operating first check the fuse in the cigarette lighter plug. If the fuse has blown, follow these steps and replace it with
a 2 amp, 6 x 30mm fast blow fuse. Caution: Using a fuse that does not meet these ratings or removing fuse protection can damage
your unit, the power cable, or the vehicles electrical system
1.
Grasp the ring near the tip of the cigarette
lighter plug, and then carefully unscrew the
ring by turning it counter clockwise.
Caution:
If you must use pliers to loosen the
ring, be careful not to crush the tip. Never use
pliers or other tools to retighten the ring on
the cigarette lighter plug.
2.
Pull the ring straight out, then remove the
metal tip, spring and old fuse.
3.
Check the fuse to see if it has blown. If it has,
replace it.
4.
Replace the metal tip and spring inside the
ring, then place the fuse inside the cigarette
lighter plug and screw the ring back onto the
plug. Make sure the metal tip is visible when
you reassemble the cigarette lighter plug.
Summary of Contents for Pantera
Page 1: ...User manual ...