UK • 15
Return to contents
7. Saving New Coordinates
If in the unlikely event that you pass the location of a fixed speed safety camera and your Pantera does not provide you with an alert,
you have the opportunity to store the coordinates of the location manually. Simply park safely as close as possible to the site and
press and hold the ‘New Location’ button for approximately two seconds. If the voice setting on your unit is switched on the unit will
confirm ‘User data stored’ and the screen will display ‘M’ and the number of that location in your unit’s memory.
You may also wish to use this feature to store your own ‘high risk zones’ or ‘accident black spots’.
When you next pass that location again your Pantera will now alert you to that location. As the unit does not know what type of
system you are passing the unit will display ‘User Pnt’ and give either a voice alert stating the location as a ‘Risk zone’ or your chosen
audible alert. Your unit can hold up to a maximum of 99 coordinates in its memory
Troubleshooting – Saving New Coordinates
When you attempt to save a new coordinate but the display reads ‘Weak Sig’ it means that your Pantera is not receiving sufficient
signal strength to plot the position. Please ensure that the Pantera built-in GPS antenna has a clear view of the sky, the unit is
displaying the standby screen and try again.
When you attempt to save the new coordinate and the display reads ‘Mem Full’ it means that the memory in your Pantera is
completely full. If you want to store any different coordinates you will have to either delete some or all of the existing coordinates
stored in the unit’s memory.
8. Deleting Stored Coordinates
If you would like to delete any of the coordinates you have stored in your units memory simply enter the units Menu by pressing the
MUTE/MENU button for approximately two seconds. When ‘SPEE appears on the display use the UP/DOWN button to scroll through
the Menu options until you see ‘USEr’ and press the SELECT button. The unit will display ‘Clr?’ If you wish to delete the co-ordinates
you have saved press the SELECT button. Please note that all saved co-ordinates will be deleted.
Summary of Contents for Pantera
Page 1: ...User manual ...