Return to contents
Start Up
Switch on the device by pressing and holding the standby power button located on
the top of the unit for 2 seconds. The Snooper will automatically synchronise with
the Micro-SD Card. Once the synchronisation is completed, the Micro-SD Card will
not function with any other device. Snooper is now ready to operate and the camera
database can be downloaded if necessary. NOTE: In most cases the Micro-SD card is
already installed in the device.
Please note that if the unit does not activate when you press and hold the standby power button for 2 seconds it may require
charging. Refer to the section ‘Charging the internal battery’ later in this manual.
System Requirements and Downloading
Before you can begin to download the AURA™ database onto Snooper, you will need to install the Snooper Updater software
provided on the software CD.
In order for the software to be installed successfully, there are certain minimum hardware and software requirements needed.
Minimum Hardware Requirements
The computer must have an Intel Pentium Class processor or equivalent, a minimum of 32MB of RAM, a monitor with 256 (8-bit)
colours or greater, 20MB of free disc space and a spare USB connection.
Minimum Software Requirements
The software will only operate on the following Windows based operating systems:
Windows Vista
Windows 7, 8 and 8.1 and Windows 10
Mac iOS X - Yosemite, El Capitain and Sierra
Download software for Mac from: http://www.snooperneo.co.uk/SoftwareMac.cfm
Download PC software f rom: https://www.snooperneo.co.uk/SoftwareSpeedTrap.cfm?type=270
NOTE: Snooper Updater software does not support Windows 95, 98, Millennium, 2000, XP.
Once the software is installed, you are ready to download the speed camera database onto Snooper. Once the initial setup is
completed the speed camera updater software icon is displayed on your desktop.
EN Page 8 of 43
MY Speed combined V3.0 02/21
Summary of Contents for My-Speed XL
Page 1: ...User manual...
