Snom m9r, Quick Start Manual

Page: 27 / 134

27
snom m9r Quick Start Guide
v1.3.0
E
N
G
L
I
S
H
8. The equipment may get warm when batteries are being charged. To
avoid damage, it is recommended that the product not be placed on
antique or veneered wood.
9. The location of the base unit of the phone should be close to a phone
jack, a personal computer, and a continuous power outlet (an AC
outlet that does not have a switch to interrupt power).
10. Keep base and handset away from sources of electrical noise such as
motors or fluorescent lighting.
FCC AND OTHER INFORMATION
This equipment complies with Parts 68 of the FCC rules and the requi-
rements adopted by the Administrative Council for Terminal Attachments
(ACTA).
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Privacy of com-
munications may not be ensured when using this phone.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a parti-
cular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try and correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet or on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TVtechnician for help.