EN – 30
Install Axle Bushing
1.
Pre-tap new axle bushings with original tapping
screws.
2.
Install axle bushing onto axle and secure to frame with
original tapping screws from inside frame.
IMPORTANT:
If reinstalling right axle bushing, align spur
gear with pinion gear, position axle as far to the right as
possible and reinstall roll pin into left side of axle.
Position sleeve bushing and flat steel washer against frame
before reinstalling roll pin. See Figure 64.
3.
Reinstall sleeve bushing onto axle.
4.
Reinstall bottom cover and secure with six hex
screws.
5.
Reinstall wheels and secure with lock pins.
IMPORTANT:
At least one lock pin MUST be inserted
through wheel hub and axle.
6.
Return unit to operating position.
7.
Reconnect spark plug wire and fill fuel tank.
Figure 63
Figure 64
1. Spur Gear
2. Pinion Gear
3. Roll Pin
