8
3.7
Connect with a computer
The device can be connected with the computer through the MINI USB on its left
side. You can copy the document between navigator and computer or copy the data
from the navigator to computer.
1. Please confirm the Truck Nav is powered on;
2 Connect the MINI end [ ] of USB cable with the USB port on the left part of
GPS device and the normal end [ ] with the Host port on computer.
3
Please pull out the MINI USB cable after you finished your operation, the GPS
navigator will return to the pre-operation interface.
【
Remark
】
Other functions of the Truck Nav cannot be used while it is connected with
a computer.
【
Note
】
In the process of communication, the following operations will break off the
connection with computer, any unfinished data transfers will be lost.
1.
Pull out the MINI USB cable;
2.
Power off
3
Reset the system by using reset button or electric switch
Summary of Contents for Truck Nav
Page 1: ...Hardware User Guide ...