5
This chapter will give an introduction to the basic functions of the navigation system
so you can get up to speed quickly.
2.3 Product appearance
Chapter Three
3.1 Power supply and charge
Before using the Truck Nav for the first time please charge it fully using the mains
adapter.
3.1.1 Power supply
There are three ways of supplying power: battery, charger, USB cable.
The Truck Nav uses the battery to supply power when it is not connected with to a
charger or USB. The mark [
] on the up right of interface indicate the current
charge level.
The Truck Nav uses the external power when a charger is connected and uses the
USB cable to supply power when connected to a PC.
【
Remark
】
The built in Lithium battery is not user replaceable. Under normal
conditions (if the back light is not so bright), the actual running time will be different
depending on how it is used. Some functions (audio playing, video playing, bright
back light) will consume more power, which will reduce the running time.
【
Note
】
The built in battery is a Lithium battery. In order to avoid fire and burning,
please do not poke, bump or take it apart or throw it into fire or water.
3.1.2 Use the travel charger to supply power
When the Truck Nav is first used, please use the mains charger to charge it.
1. Connect the USB connector on the charger to the socket on the left side of
the unit.
2. Plug the mains charger in to the mains.
【
Remark
】
Red LED indicates it’s being charged. Please wait until it is fully charged
and don’t pull out the adaptor while charging. When it is fully-charged, the LED will
Summary of Contents for Truck Nav
Page 1: ...Hardware User Guide ...