6
turn to blue. If the battery is low or empty charge it as soon as possible, leaving the
Truck Nav with a flat battery for extended periods can harm the future performance of
the battery.
3.1.2 Use the car charger to supply power
1.
Connect the USB connector on the charger to the socket on the unit.
；
2.
Plug the charger into your accessory/cigarette lighter socket. 12V and 24V
sockets are supported.
3.2 Power on/off
3.2.1 Power on:
Please check
：
The battery is charged or it is connected to external power source;
Please press the button on the top of the unit to boot.
【
Note
】
If bringing the unit from a cold environment into a warm one please wait for it
to warm up naturally before turning on as large humidity changes can cause
condensation which may cause short circuits.
3.2.2 Power off
Press the button on the top of the unit to turn off, the unit will enter the power saving
mode and maintain the last operation status when boot next time.
3.3 Reset system
If the system is not working you can reset the system in the following way:
Use the stylus (7” Truck Nav only), pen or bent paperclip to press the reset button that
is recessed in a small hole on the rear of the unit.
Summary of Contents for Truck Nav
Page 1: ...Hardware User Guide ...
