manualshive.com logo in svg

Snell VEGA-16MV, User Manual, Page: 49 / 260

Share
Download
Snell VEGA-16MV User Manual Download Page 49

Vega-MV Router Multiviewer - User Manual  

Issue 1 Revision 2

Page 49

© 2017 SAM

   

 

Vega-MV Installation   

5

Vega-MV Installation 

Section contents:

5.1 Ventilation

page 50

5.2 Rack Mounting

page 51

5.3 FCC Compliance

page 52

5.4 HDMI Cable Retention Options

page 53

5.5 Vega-MV Power Supplies and Fuses

page 55

5.5 Vega-MV Power Supplies and Fuses

page 55

5.6 Vega-MV Frame Power Supplies

page 55

5.7 Powering Up (Unit Start Up)

page 57

•

Refer to Section 2  on page 8 for safety information.

•

Check that all cards and the power supply are correctly seated in the frame before 
connecting power to the unit.

•

The installation and maintenance of the Vega-MV unit and any associated 
equipment must be carried out by persons suitably qualified to work with equipment 
which may be connected to the mains supply.

•

The mounting and installation of the unit must be arranged by the user to comply 
with all current local safety regulations.

Summary of Contents for VEGA-16MV





































































































































































































































































Reviews:

No comments