manualshive.com logo in svg

Snell VEGA-16MV, User Manual, Page: 118 / 260

Share
Download
Snell VEGA-16MV User Manual Download Page 118

Vega-MV Router Multiviewer - User Manual  

Issue 1 Revision 2

Page 118

© 2017 SAM

   

Group Menu 

Web Interface  7.5 

7.5 Group Menu 

The group menu allows objects to be selected as a group.

Objects can be selected individually to create a group by holding the 

[Ctrl]

 key down before 

clicking on them. A small square block is displayed in the bottom right corner of each selected 
object.

Figure 87  Group Menu. 

Menu Option

Description

Select All Objects

All objects in the layout will be selected and can be 
operated on as a group.

Un select All Objects

Cancels group all objects command.

Cut Objects

Deletes all the tile objects in the group.

Paste Objects

Pastes the object that is on the clipboard to all objects in the 
group.

Move Objects to Front

Moves all tile objects in the group to the front.

Move Objects to Back

Moves all tile objects in the group to the back.

Table 41

Group Menu. 

Summary of Contents for VEGA-16MV





































































































































































































































































Reviews:

No comments