manualshive.com logo in svg

Snell MV-16, User Manual

Share
Download
Snell MV-16 User Manual Download Page 47

MV-16 Multiviewer

www.snellgroup.com

Operation

Issue 1 Rev 12

Page 47

© 2013 Snell Limited

3.12.5.4

Tally Tab (Video Object)

This tab is only displayed in tiles that are of Video type.

Fig 42. Edit Object - Properties - Tally Tab. 

Tally

Select hardware or one of two software tallies. 

The hardware tally is related to the source of the video window. There 
are 16 GPI inputs; one for each source.

The two software tallies operate in accordance with TSL protocol. 
This has up to 127 display addresses; each address comprising 4 
tallies and a UMD. The address assigned to a source depends on 
how the TSL Protocol has been configured (see section 3.4.8.1 for 
details of the TSL Protocol Options).

Each video window can use the first 2 tallies of its display address to 
trigger the 2 tallies available in its UMD bar, or the border tally if set 
up appropriately.

Style

Select red-green, green-red, red-red and green-green.

Shape

Select fill, square or round.

Position

Select UMD, border or UMD and border.

Disabled

Sets the disabled color to either default disabled color, UMD color, 
border color, or the user selected color set in the box below this 
control. 

Colour

Selects disabled color if disabled color is set to the user-selected 
source. 

Visible

Turns the display of the tally on/off.

Table 36.

Edit Object - Properties - Tally Tab. 

Summary of Contents for MV-16





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands