Snell MV-16, User Manual

Page: 34 / 92

MV-16 Multiviewer www.snellgroup.com Operation
Issue 1 Rev 12 Page 34 © 2013 Snell Limited
If Use Audio Channel Alarm Settings is ticked and audio loss alarm is enabled in the Alarm
tab of the Source Properties dialog, then the enabled state of each channel will depend on the
settings in this Audio Alarms dialog, and the threshold set for the audio loss level will also be
determined here.
If Use Audio Channel Alarm Settings is ticked but the audio loss alarm is disabled, then none
of the audio loss alarms will be enabled.
The following table summarizes the various alarm status conditions.
3.5.4 Copy Tab
Individual Alarm
Use Audio Channel
Alarm Settings
Alarm State
Enabled Enabled Enabled and uses user threshold settings.
Enabled Disabled Enabled but uses nominal threshold settings.
Disabled Enabled Disabled
Disabled Disabled Disabled
Table 21. Audio Alarm Status Conditions.
Fig 27. Source Properties - Copy Tab.
Audio Check to copy audio settings from selected source/s 1 to 40.
Alarm Check to copy alarm settings from selected source/s 1 to 40.
Select All Select all sources.
Select None Deselect currently selected sources.
Copy To Copy settings to selected source/s.
Table 22. Source Properties - Copy Tab.