MV-16 Multiviewer
www.snellgroup.com
Operation
Issue 1 Rev 12
Page 22
© 2013 Snell Limited
3.3.2.1
Module Menu
The Module Menu (Fig 14.) allows a module's global settings to be configured.
Fig 14. Module Menu.
Auto update
Automatically update tile layout to the display output and preview
every time it is changed in the edit workspace.
Update Layout
Transfer edit workspace layout to display output and preview.
Get Layout
Transfer the current display layout to the edit workspace.
Setup Module
Opens the Module Properties dialog of the currently selected tile
object.
Setup Source
Opens the Source Properties dialog of the currently selected tile
object.
Setup Remotes
Not Used
Set Time
Opens the Set Time dialogue to adjust the clock and date
settings.See section 3.6.
Halt, Reboot, Reset
Module
Maintenance items for shutting down, rebooting the system, or
resetting input/output cards. The task that each of these execute is:
•
Halting the module guarantees that any files that have not
been saved yet, such as layout ones, will get saved before
powering off the frame. This stops the system from running.
The only way to restart it is to power off - power on again.
•
Rebooting the module will shut the system down and start it
back up again. This can take up to 70 seconds.
•
Resetting the module leaves the CPU running, but resets and
reloads the firmware into all the input/output cards.
Table 8.
Module Menu Items.
Note:
The error message, Selected object has no source, will appear if the current object is not
an audio or video object.
Summary of Contents for MV-16
Page 2: ...MV 16 Multiviewer www snellgroup com Issue 1 Rev 12 Page 2 2013 Snell Limited...
Page 16: ...MV 16 Multiviewer www snellgroup com Installation Issue 1 Rev 12 Page 16 2013 Snell Limited...
Page 56: ...MV 16 Multiviewer www snellgroup com Operation Issue 1 Rev 12 Page 56 2013 Snell Limited...
