![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqotr30/iqotr30_operators-manual_1309066023.webp)
Version 1 Issue 1
www.snellgroup.com
IQOTR30
Page 21
Operation from an Active Control Panel
The module can be operated from an active control panel via the RollCall™
network.
All operational parameters and selections described in the previous section are
made using a system of menus displayed in the two LCD windows – the
Information window and the Control window.
Information Window
The information window contains four lines of text indicating the current state of
the unit.
Control Window
The Control window displays all selection menus and sub-menus.
The main or top level menu allows various sub-menus to be selected by pressing
the button adjacent to the required text line.
Note that where a menu item is followed by three dots (...) this indicates that a
further sub-menu may be selected.
Whenever a menu item is selected the parameters of that selection will be
displayed in the Information window of the front panel. Where the selection is
purely a mode selection and does not enable a sub-menu, the text will become
reversed (white-on-black) indicating that the mode is active. If the mode is not
available for selection the text will remain normal.