![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqotr30/iqotr30_operators-manual_1309066020.webp)
Version 1 Issue 1
www.snellgroup.com
IQOTR30
Page 18
•
To disable RollTrack functions, select the
Disable All
check box.
To configure a RollTrack action:
1. Select the
Index
number. This identifies the RollTrack action being config-
ured. Up to 16 RollTrack actions can be created.
2. From the
Source
list, select the source of the information that will trigger Roll-
Track transmission.
3. Enter the RollTrack
Address
and click
S
. To return the address to its default
value, click the preset button (
P
).
4. Enter the RollTrack
Command
and click
S
. To return the value to its default,
click the preset button (
P
).
Viewing RollTrack Information
RollTrack Sending
and
RollTrack Status
display information about the status
of RollTracks.
RollTrack Sending
displays the information when the unit is actively sending a
RollTrack command:
•
No
: The command is not being sent.
•
Yes
: The command is being sent.
RollTrack Status
displays the status of the currently selected RollTrack Index:
•
OK
: RollTrack message sent and received OK.
•
Unknown
: RollTrack message has been sent but has not yet completed.
•
Timeout
: RollTrack message sent, but acknowledgement not received. This
could be because the destination unit is not at the specified location.
•
Bad
: RollTrack message has not been sent correctly, acknowledged at the
destination unit. This could be because the destination unit is not of the type
specified.
•
Disabled
: RollTrack sending is disabled.