Kudos Pro UHD1000
System Operation
Issue 1 Rev 2
Page 23
© 2016 SAM
6.4.2 Output
Press
Output
to make settings and adjustments to the video output signal. Available
functions are:
In 1-4 conn status
None
: UHD has not been detected
Inconsistent
: The detected input is a possible UHD format
but does not match the other inputs
2SI
input [n]
: UHD has been detected. The format is
Two-Sample Interleaved.
n
indicates the channel number
contained in the PID. Where this does not match the input
number, it will be necessary to reconnect the inputs in the
correct order.
SQD
: UHD has been detected. The format is Square
Division as a 2SI PID has not been detected.
Error
: [Inputs 2-4 only]. Indicates a timing error relative to
input 1.
UHD conn status
Reports interface standard on each of the inputs,
1080
59p-A
;
1080 50i
; etc. for example.
Loss
indicates missing inputs.
Note:
The UHD1000 automatically detects the input standard.
Menu Option
Operation
Menu Option
Operation
Out std-SD/HD in
(Output
standard with SD/HD input)
Use this control when the input is SD, HD or 3Gbps.
Scroll through the list until reaching the required output
standard, then press to select. Press the rotary control again
to confirm and return to the
Output
menu.
Out std-UHD in
(Output
standard with UHD input)
Use this control when the input is UHD.
Scroll through the list to the required output standard, then
press to select. Press the rotary control again to confirm and
return to the
Output
menu.
Note
: When input and output are both UHD, the output
frame rate will follow the input frame rate.
Current out std
Displays the current output standard, e.g. 1080 59i etc.
UHD colorimetry
Sets the color standard for UHD. Choose from:
•
BT.709
(default)
•
BT.2020
UHD interface
Choose from:
•
SQD
[Square Division]
•
2SI
[SMPTE425-3; SMPTE425-5]
