Kudos Pro UHD1000
System Operation
Issue 1 Rev 2
Page 51
© 2016 SAM
6.5.1.3
Upgrading UHD1000 Software
New versions of the UHD1000 software are released periodically. Follow the instructions
below to install these updates.
1.
Open a suitable browser window, type the unit’s IP address into the address bar and
press R
ETURN
. The browser connects to the unit and the UI is displayed.
2.
Click
Setup
; the Setup page is displayed:. Scroll down to the
Upgrade
section:
3.
Click
Choose File
; a standard Windows Browse dialog is displayed. Navigate to the
upgrade package, select it and click
Open
; the Browse dialog is closed, and the
package name is displayed next to
Choose File
.
4.
Click
Send to Unit
; the software is copied to the unit. When the copy is complete, the
user is prompted to start the upgrade; click
Upgrade Unit
to begin.
Progress of the upgrade is displayed in the
Status
field; note that the unit will reboot
as part of the process.
5.
When the upgrade is complete, a confirmatory message will be displayed. Successful
completion is also confirmed by the
Software Version
field at the top of the Setup
page, which should reflect the new software version.
Recovery Mode
If the upgrade fails, because of network failure for instance, the UHD1000 will restart in
Recovery
mode. In this case, repeat the upgrade installation procedure described above.
Note:
•
Ensure that the upgrade package is readily accessible before beginning the
upgrade.
•
The upgrade process will take around 15 minutes. The unit will not be able to be
used until the process is complete.
Figure 4
Browser Control Interface - Software Upgrade
