Kudos Pro UHD1000
System Operation
Issue 1 Rev 2
Page 20
© 2016 SAM
6.3 Using the Front Panel - Basics
The front panel buttons provide access to the UHD1000 control menus.
•
Turn the rotary control clockwise to scroll down through a menu list, or anti-clockwise
to scroll up.
•
When on the required menu item, press the rotary control to select it.
•
When a menu option that offers adjustment is selected, such as audio gain, the value
can be adjusted by turning the rotary control. This allows control for fine-tuning values
in small increments. When the desired value has been entered, press the rotary
control to set the value.
•
Select
Back
at the bottom of each menu page go back up a level, or simply select
another front panel button to change to a different menu.
•
To return to the Home screen, press the
Home
front panel button.
6.3.1 Entering Numeric Characters from the Front Panel
6.3.2 Entering Numeric Characters from the Rotary Control
Where a parameter may be set from a range of values with only certain specific steps,
numeric entry is via the rotary control:
1.
Press the rotary control to show the current value, e.g. contrast.
2.
Rotate the control clockwise to increment the value by each step, e.g. contrast
increments in steps of 0.2 dB. Likewise, rotate the control counter-clockwise to
decrement the value.
3.
The value will not pass beyond its defined range, e.g. valid contrast adjustments are
from -6.0 dB to 6.0 dB.
4.
To return to default, press and hold the rotary control. The values are reset.
5.
When the value is set as required, press the rotary control again to confirm and return
to the last menu.
6.3.3 Selecting an Action Using On/Off
Where an action is available to turn a feature on or off using the rotary control:
1.
Scroll the rotary control to the required item, e.g.
Video
>
Enable
proc amp
.
2.
Press the rotary control to view the current status, e.g.
On
.
3.
To change the action, turn the rotary control until the desired action is visible, e.g.
Off
.
Press the rotary control to select.
Note:
•
Press and hold the rotary control for a few seconds to jump to the
Back
option
when in any menu list.
•
To reset any parameter back to its default value: from the parameter selected,
press and hold the rotary control for a few seconds.
This feature is not currently implemented. Use the Web browser user interface
to enter this kind of information. See section 6.5.
